Front Panel - ION Karaoke Star Plus Guia De Inicio Rapido

Features

Front Panel

4
1
2
1. Microphone Inputs: Connect the included dynamic microphones to these 1/4" (6.35 mm) inputs.
2. Microphone Volume: Adjust this dial to control the volume for both microphone inputs.
3. Master Volume: Adjust this dial to control the speaker's main mix volume, which includes the microphone inputs, Aux
input, and the audio from a paired Bluetooth device.
4. Aux Input: Connect a smartphone, MP3 player, DVD player, computer soundcard, or other line-level audio source to
this 1/8" (3.5 mm) Aux input.
5. Aux Volume +/-: Press these buttons to control the volume for the Aux input and Bluetooth signal.
Note: The Aux input volume will be adjusted separately from the Bluetooth volume.
6. Bluetooth: Press this button to pair to a Bluetooth device. Press this button again to unpair from a connected
Bluetooth device.
Note: Volume on your Bluetooth device should be turned up.
7. Bluetooth Icon: The Bluetooth icon will be lit solid when a device is paired to Karaoke Star Plus.
8. Aux/Headphone Output: Connect this 1/8" (3.5 mm) output to headphones, a powered speaker, or a recorder.
9. FX Group: Press one of the A-D buttons to select an effect category.
10. FX Group Icon: The display will show the selected category for the built-in effects.
11. Voice Effect On/Off: Press this button to activate/deactivate the built-in effects. The built-in effects are applied to both
microphone inputs.
12. Voice Effect Icon: The display will show the effect preset icon when the built-in effects are activated.
13. -/+: Use these buttons to select one of the built-in effects.
14. Light Mode: Press this button to cycle through these different light effects:
•
Off (no lights)
•
EQ Bars (reactive to music)
•
Horizontal Color Wipe (non-reactive to music)
•
Shimmering Large Blocks (non-reactive to music)
•
Shimmering Small Blocks (non-reactive to music)
•
Falling Blocks (non-reactive to music)
•
Wavy Line (reactive to music)
•
Pulsating Block (reactive to music)
•
Light Bar (reactive to music)
•
Snowflake/Square Lights (non-reactive to music)
•
Vertical Lights (non-reactive to music)
15. USB Charge: Connect your device's charge cable here to charge it.
Note: The USB charging port does not play music. Use Bluetooth or the Aux input to play your music source.
16. Charge LED: Indicates battery charging status of Karaoke Star Plus.
• Blinking LED = The unit is powered on, the battery is low and needs to be recharged.
• Solid LED = The battery is charging.
• LED OFF = If the power cable is connected, the battery is fully charged. If the unit is ON with the power cable
not connected, the battery has not yet reached a low charge level.
4
6
16 16
7
5
9
8
10 10
13 13
4
3
14 14
11 11
1
2
15 15
3