Main Parts; Installation Of The Appliance - TESY CN205EASLFR Instrucciones De Uso

– there is danger for your life!
•
The power socket must be easily accessible all the time
in case the power plug has to be disconnected as fast
as possible! Never pull the power cord or the appliance
itself in order to disconnect it from the mains.
•
ATTENTION! Outgoing air gets hot during operation
(up to more than 100°C).
•
If the power cord of this appliance gets damaged,
stop its operation and call its supplier/retailer for
advice about repair in local service centre.
•
Do not cover the appliance. If the appliance gets
covered, there is risk of overheating and fire.
•
If the appliance is damaged or does not work properly,
stop it and do not repair it yourself. For any kind of
repairs call for assistance the after-sale service centre.
This is the place where you will have your broken part
replaced with an original one. Non-adherence to this
instruction will compromise the appliance safety.
•
If you decide to stop using such kind of appliance,
it is advisable to render it unusable by cutting its
power cord after disconnecting it from the mains.
It is advisable all possible dangers related to the
appliance to be prevented, especially in relation to
children that may play with out-of-use appliances.
•
Never keep the appliance unnecessarily switched
on. Disconnect it from the power socket when you
do not intend to use it for a long period of time.
•
The appliance should not be positioned close under
power sockets!
•
Warning: Do not use this appliance with a
programming device, counter or any other device which
can automatically switch it on because if the appliance
is covered or improperly positioned this may cause fire.
•
Position the power cord in such a way that it does not
obstruct the free movement of people and can not be
stepped on! Use only approved extension cords which are
suitable for this appliance, i.e. have got a conformity sign!
•
Never move the appliance by pulling its power cord
and do not use the power cord for carrying objects!
•
Do not bend the power cord and do not stretch it
over sharp edges, do not position it over hot plates
or open flames!
•
Never use this appliance in close proximity to wet
premises – bathroom, shower cabin or swimming pool!
PACKING
•
After unpacking the appliance, check if all its
elements are included in the packing and that it has
not been damaged during transportation! In case
damage or incomplete delivery is found, contact
your authorized retailer!
•
Do not throw away the original packing! It could
be used for storage and transportation purposes in
order to avoid damages during transportation!
•
Disposal of packing materials should be done in
the appropriate way! Children should be prevented
from playing with the polyethylene bags!
English

MAIN PARTS

Decorative plate-glass
Feet

INSTALLATION OF THE APPLIANCE

Free standing position
•
Attach the two plastic feet to the base of the panel heater
•
Use a suitable tool to fix the feet by means of four
screws which are included in the appliance set;
•
Place the panel heater into a proper working
position before connecting it to the power supply;
•
Choose a suitable place for the appliance, taking
into account the safety instructions;
LCD screen
Control buttons
Switch
ON/OFF
Power cord
Temperature
sensor
Remote control
Usage and Storage Instructions
EN
3