s
Circuit Breaker, 600VDC
Interruptor, Caja Base 600VDC
Disjoncteur, de base 600VDC
Installation Instructions / Instructivo de Instalación
Hazardous Voltage
Hazardous Voltage
Will cause death or serious injury
Will cause death or serious injury
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens .
NOTICE:
[ AVISO: ]
Only Qualified Personnel should work on this equipment, after becoming
thoroughly familiar with all warnings, safety notices and maintenance
procedures contained here in and on the devices.
A Qualified person is one as defined in NFPA 70.
[Solamente personal calificado debe trabajar en este equipo, después de
familiarizarse a fondo con todas las advertencias, avisos de seguridad, y
procedimientos de mantenimiento contenidas aquí y en los dispositivos.
Una persona calificada es una como se define en el NFPA 70.]
NOTE - These instructions do not purport to cover all details or variations in
equipment, or to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should further
information be desired or should particular problems arise, which are not
covered sufficiently for the purchaser's purposes, the matter should be
referred to the local Siemens sales office. The contents of this instruction
manual shall not become part of or modify any prior or existing agreement,
commitment or relationship. The sales contract contains the entire obligation
of Siemens. The warranty contained in the contract between the parties is
the sole warranty of Siemens. Any statements contained herein do not create
new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are
registered trademarks of Siemens AG or Siemens Industry, Inc. The
remaining trademarks in this publication may be trademarks whose use by
third parties for their own purposes could violate the rights of the owner.
3VL2605-2KN30-0AA0
3VL2606-2KN30-0AA0
3VL2607-2KN30-0AA0
3VL2608-2KN30-0AA0
3VL2609-2KN30-0AA0
3VL2610-2KN30-0AA0
3VL2611-2KN30-0AA0
3VL2612-2KN30-0AA0
3VL2615-2KN30-0AA0
8 0 6 9 6 1 A 0 1
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
energizar el interruptor.
M4 X 90 mm
3VL9300-8SA20
Frame: DG, FG - Type HDGD, HFGD
Caja Base: DG, FG - Tipo HDGD, HFGD
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
Cal. ISO 6789
3VL3610-2KN30-0AA0
3VL3615-2KN30-0AA0
3VL3625-2KN30-0AA0
HDC3B050
HDC3B060
HDC3B070
HDC3B080
HDC3B090
HDC3B100
HDC3B110
HDC3B125
HDC3B150
1 / 5
U.S. Cat. No.
Euro Order No.
HDC3B_ _0 3VL26_ _-2KN30-0AA0
HFC3B_ _0 3VL36_ _-2KN30-0AA0
11/32"
7mm
Ø.08 – .10 x 5.9
[ Ø 2 - 2.5 mm X 150 mm ]
HFC3B100
HFC3B150
HFC3B250
8 - 32 X 3.38"
MSKF2
M4 X 90 mm
3VL9300-8SA20
8 - 32 X 3.38"
MSKF2
I.L. No. 806961A01
1/4"
5/32"