Additional Accessories Available - Weston 07-4101-W-A Manual De Instrucciones

ADDITIONAL ACCESSORIES AVAILABLE

6" JERKY SLICER BLADE RACK ASSEMBLY
6" TENDERIZER/CUBER BLADE RACK ASSEMBLY
*TRANSFORM THE CUBER/TENDERIZER INTO A JERKY SLICER (OR THE JERKY SLICER INTO A CUBER/
ASSEMBLY INSTRUCTIONS
1. Using an Allen Wrench and 2 Leg
Screws and Lock Washers, attach the
Support Leg to the Lower Housing
(FIGURE A). The C-Clamp should be
facing inward.
2. Install the Chute to the Top
Housing using an Allen Wrench
and the 2 Chute Screws and Lock
Washers (FIGURE B).
3. Attach the Countertop Protector Pad
to the Support Leg and the Protector
Cap on the top of the C- Clamp
(FIGURE C).
4. Open the C-Clamp by turn
the screw clockwise to open the
C-Clamp. Place the C-Clamp onto
the work surface, then turn the
screw counter-clockwise until firmly
tightened.
6
PART DESCRIPTION
TENDERIZER) BY REPLACING THE BLADE ASSEMBLY.
PART NUMBER
07-3302
07-3103
Lower
Housing
Support Leg
Chute
Top
Housing
Allen
Chute Screws (2) &
Wrench
Lock Washers (2)
Countertop
Protector
Pad
FIGURE A
Allen
Wrench
Leg Screws (2)
&
Lock
Washers (2)
FIGURE B
FIGURE C