english / USA
Change the fuel pick up body
every year.
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
12
Starting / Stopping
the Engine
1
4
2
Observe safety precautions – see
chapter "Safety Precautions".
Start as follows:
:
Set switch (1) to position
:
Squeeze the throttle trigger (2) and
move the setting lever (4) to midway
position at the same time.
:
Release the throttle trigger.
:
Release the setting lever, this is the
starting throttle position.
The setting lever enables you select
and hold any throttle position
between idle and full throttle. Move
the setting lever to the idle position
before shutting off the engine.
6
I
Set the choke lever (5):
For cold start to g
For warm start to e
:
Press fuel pump bulb (6) at least five
times.
5
BG 46