Singer Intelligent Pro Steam Press Manual De Instrucciones página 8

PRESSING AND STEAMING TIPS
PRESSING PANTS
1. Place Pressing Cushion under waistband and press. Continue repositioning waistband
until completely pressed.
2. To press inseam, place Pressing Cushion under area to be pressed.
3. Place pleated area on Ironing Board. Carefully fold pleats and press.

PRESSING SHIRTS AND BLOUSES
1. Place shoulder yoke on
Ironing Board first and
press.
2. Place sleeves on Ironing
Board with the fold parallel
to long seam, and press.
3. Place cuffs on end of
Ironing Board, and press.
4. Place bottom of shirt
behind Ironing Board by
pressing the side with
pocket. Pull shirt towards
you as you press each
section.
NOTE: Embroidery should
be placed face down on
Ironing Board to reduce
wear and prevent damage
to delicate areas.
5. Finish by pressing collar of shirt.
OTHER TECHNIQUES
• Placing Pressing Cushion between fabric and Pressing Plate may help with delicate fabrics.
• If you have older types of buttons or zippers, you may need to take special care to avoid
melting. In order to do so, place garment face-down and cover with Pressing Cushion
before pressing.
• Spray Bottle may be used to spray fabric lightly. This will help to remove stubborn wrinkles.
8 – ENGLISH
Using the
Intelligent Pro Steam Press





