Power On/Off; Preset Stations - Roadstar RU-400BT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
Warning
Use the specified amperage fuse for each lead. Use of a higher amperage fuse may
cause serious damage.
OPERATING INSTRUCTIONS
1. POWER ON/OFF (PWR)
Insert the front panel in the unit and push Power button in order to switch on the unit. Push
PWR button newly in order to switch off the unit and push REL button (14) to release the
front panel.
Note: Never release the front panel when the unit is on. Power remains on even when car
radio is off.
2. SELECT / 3. VOLUME UP/DOWN
Rotate the VOLUME Knob (3) to control the VOLUME. To select other functions, press the
SELECT (2) button shortly until the desired functions is shown on the display. Figure 1
shows how control functions are selected using the SELECT button.
1. VOLUME (rotate knob)
2. SELECT (push down)
3. BASS
4. TREBLE
5. BALANCE
6. FADER
7. EQUALIZER (FLAT - POP - CLASS - ROCK - EQ OFF)
8. TA VOLUME
9. REGIONAL ON / OFF
10. LOCAL ON / OFF
10. STEREO / MONO
11. LOUDNESS
3. VOLUME CONTROL
Rotate the VOLUME knob to increase or decrease the volume. This knob can be used to
adjust the BASS, TREBLE, BALANCE and FADER.
This knob also selects the possible options in RDS function.
TA VOLUME (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode
English
7
REG ON / OFF
LOCAL / DX
"Local" position in areas with strong signals to let radio stop at only strong stations during
manual tuning (LOC appears). Select Distant position in areas with weak signals to listento
all stations.
MONO / STEREO
When press the SEL button for more than 2 seconds, it is activated as selecting mode
of these function. When FM stations are weak and are disturbed, listening can be improved
by selectingMONO.

4. PRESET STATIONS (1,2,3,4,5,6)

8
English
of these function. Turn the volume knob to set the level of TA Volume.
– Regional mode ON:
AF switching or PI SEEK is implemented to the station which have all PI codes same as
current station. REG segment is turned on, in LCD display.
– Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is
implemented.
(A) RADIO MODE:
When pressed short, these keys select a preset station directly. When pressed longer
than 1 sec., current station is stored in preset memory bank. When PTY mode is se-
lected, the PTY switch is shared as follows:
PTY music group ---- PTY speech group ---- OFF
MUSIC
1. POP M, ROCK M
2. M.O.R. M, LIGHT M
3. CLASSICS, OTHER M
4. JAZZ, COUNTRY
5. NATION M, OLDIES
6. FOLK
TRAVEL
1. NEWS, AFFAIRS, INFO
2. SPORT, EDUCATE, DRAMA
3. CULTURE, SCIENCE, VARIED
4. WEATHER, FINANCE, CHILDREN
5. SOCIAL, RELIGION, PHONE IN
6. TRAVEL, HOBBIES, DOCUMENT

Publicidad

Tabla de contenido
loading

Tabla de contenido