Alternative method:
:
Remove the chain guard.
Position the shaft on a branch so
that it is held by the hook.
:
Hold the unit firmly with your left
hand around the fan housing – your
thumb under the fan housing.
HT 73
:
Pull the starter grip slowly with your
right hand until you feel it engage –
and then give it a brisk strong pull.
Do not pull out starter rope to full
length – it might break.
:
Do not let the starter grip snap back
– guide it slowly into the housing so
that the starter rope can rewind
properly.
english / USA
When engine begins to fire:
:
Move choke lever to e
and continue cranking
As soon as engine runs:
:
Blip the throttle trigger – the slide
control moves to the run position #,
and the engine returns to idling
speed.
Make sure carburetor is correctly
adjusted – chain must not run when
engine is idling.
Your power pruner is ready for
operation.
To shut down engine
:
Move the slide control in direction
of c to $.
23