Installation Instructions - Presto 39202 Manual De Instrucciones

ENGLISH

1) INSTALLATION INSTRUCTIONS

2) Bed pan washer
3) PRECAUTIONS FOR USE (The product guarantee depends on the respect for these rules)
INSTALLATION and START UP
For products delivered with filters, these must be installed in accordance with the instructions.
Before commissioning any of our valves, it is essential to carefully drain
the pipes that can damage the mechanisms or water passages (PRESTO® heads that can be dismantled from
front).
Recommended operating pressure according to NF EN 816: 1 to 5 bars.
CLEANING
The chrome-plated coating of PRESTO® valves must be cleaned only with soapy water.
Abrasive, acid, alkaline or ammonia-based household products are prohibited.
4) Time delay valve from 15 to 25 Sec.
5) Close the valve after use
6) Maximum pressure
7) See the hand shower support installation template on page 3
8) Hand shower support installation template
9) Drilling Ø6
10) This document is not contractual; we reserve the right to modify the characteristics of our products without
notice.
11) PATENTED and REGISTERED MODELS