Bissell Total Floors 73D2 Serie Guia Del Usuario página 13

M
aintenance and care
Cleaning the multi cyclonic
assembly and screen
1.
Unplug the vacuum from the electrical outlet.
2.
Remove the dirt container from the vacuum.
3.
Remove the top portion of the dirt container by
grasping the carry handle and turning counter
clockwise and pulling up and out of the dirt
container.
4.
Brush the screen area with a soft brush over
a trash can to remove dirt and debris. Gently
tap the multi cyclonic assembly on the ground
to remove additional dust from within the
cyclones.
5.
Dirt container may be wiped clean with a
damp cloth or wash in warm water. Make
sure dirt container is completely dry before
reassembling.
6.
Place the top portion back onto the dirt
container by grasping the carry handle and
turning clockwise to lock into place. Be sure
that the dirt container release button is aligned
with the emptying button when locked into
place.
10
w w w . b i s s e l l . c a
w w w . b i s s e l l . c a
3.
8 0 0 . 2 6 3 . 2 5 3 5
1 - 8 0 0 . 2 6 3 . 2 5 3 5
11