Build Framework; Install Upper Flue Mounting Bracket; Install Plenum - Broan Elite EW48 Serie Manual De Instalación, Uso Y Cuidado

3. BUILD FRAMEWORK

• When cutting or drilling into wall, do not damage electrical wiring and other hidden utilities.
• When building framework, always follow all applicable construction codes and standards.
Construct wood wall framing that is even with the surface of wall studs.
Wood wall framing must be at least 1/2" thick and 3" high. Fasten wood wall
framing to wall studs for a solid installation.
Make sure that the height of the framing will allow the retaining screws to be
secured to the framing within the dimensions shown.
After wall surface is finished, using a level, draw a vertical line up to the
ceiling starting from the center of the planned hood location. Measure and
mark the retaining screw locations using the measurements given in illustration
at right. Insert 2 M4 x 38 Phillips 9 mm round head mounting screws in wall
framing; do not completely tighten the screws at this time.

4. INSTALL UPPER FLUE MOUNTING BRACKET (

Center the upper flue mounting bracket with the center line previously
drawn in step 3 and place it flush with the ceiling. Use the upper flue
mounting bracket as a template to mark the position of its screws.
Secure the upper flue mounting bracket to the wall using 2 M4 x 38
Phillips 9 mm round head mounting screws. Make sure that the bracket
is tight against the wall.

5. INSTALL PLENUM (

Center the plenum with the center line previously drawn in step 3 and
place it flush with the ceiling. Use the plenum mounting slots as a
template to mark the position of its screws.
Secure the plenum to the wall using 2 M4 x 38 Phillips 9 mm round
head mounting screws. Make sure that the plenum is tight against the
wall.
!
-
NON DUCTED INSTALLATION ONLY
WARNING
HD1151A
34 ¾" =
40 ¾" =
DUCTED INSTALLATION ONLY
C
EILING
U
PPER FLUE MOUNTING
BRACKET SLOTS
HD1150
)
HD1158
4
W
ALL STUDS
F
RAMING BEHIND DRYWALL
24"
BOTTOM OF HOOD ABOVE COOKTOP
30"
BOTTOM OF HOOD ABOVE COOKTOP
)
C
ENTER OF INSTALLATION
M
OUNTING BRACKET
C L
FLUSH WITH CEILING
C
EILING
P
LENUM
MOUNTING
SLOTS
P
LENUM
FLUSH WITH
CEILING
L C
C
ENTER OF
INSTALLATION