Special Instructions - brentwood H-C1601 Instrucciones De Operación Y Seguridad

• NEVER operate your heater near an open flame or in the presence of
explosive or combustible gases or fumes, such as: gasoline, paint or
other flammable liquids. Your heater has hot internal components, and
components that can spark during normal operation.
• NEVER operate your heater near an open flame or in the presence of
explosive or combustible gases or fumes, such as: gasoline, paint or
other flammable liquids. Your heater has hot internal components, and
components that can spark during normal operation.
• DO NOT expose your heater to excessive heat or humidity, as electrical
component damage can occur.
• DO NOT pull on the power cord. Always grasp the plug when connecting
and disconnecting the power cord from the electrical outlet.
• DO NOT use extension cords with your heater. Extension cords can
overheat and cause a fire.
• DO NOT remove, replace, repair or tamper with the originally-supplied
plug.
• NEVER attempt to open or service your heater. Doing so may cause
personal injury or property damage. Should your heater or its power
cord malfunction or become damaged, discontinue operation
immediately and consult a qualified repair technician.
• Extreme caution is necessary when your heater is used near children,
pets and disabled persons. Keep your heater out of the reach of
children, pets and disabled persons to reduce the risk of personal
injury and electrical shock.

SPECIAL INSTRUCTIONS:

•
A short power supply cord is provided to reduce the risk of becoming
entangled in or tripping over a longer cord. An extension cord is not
recommended for use with this product, but if one must be used:

The marked electrical rating must be at least as great as that of the
product.

If the product is of a 3-prong grounding type, the extension cord must be
a grounding-type 3-wire cord.

Arrange the extension cord so that it will not drape over the countertop
or tabletop where it can be tripped over or pulled.
WARNING: This product is equipped with a polarized plug
(one blade is wider than the other blade) to reduce the risk
of electrical shock. This is a safety feature. The plug will fit
into a polarized outlet only one way. If you are unable to
insert the plug into the electrical outlet, try reversing the plug. If the plug
still does not fit, contact a qualified electrician. Never use the plug with an
extension cord unless you can fully insert the plug into the extension cord.
Do not alter the plug. Do not attempt to defeat the safety purpose of the
polarized plug.
3