Premier CR-4758R Manual De Instrucciones página 17

• Press again for fixed air direction.
• To directing vertical airflow, adjust the horizontal louvers manually.
26. Speed: Selects fan speed.
• Press to select desired fan speed: High – Medium – Low, in turn. LED panel will display the
corresponding air speed.
27. Sleep: Unit operates according to preset computer program, alternating between different fan
speeds.
• Press to engage in Sleep Mode. SLEEP indicator will illuminate and LED panel displays the
sleep indicator.
• To return to regular fan mode, press either SLEEP or SPEED button.
28. Cool: For cool air / humidify function.
• Press once to start the evaporative cooling function. COOL indicator light will illuminate and
LED panel displays the cool indicator.
• Press again to stop function and operate in regular fan mode.
• Make sure water is added before turning on this function. Unit cycles the water to blow cool,
humidified air.
• Add ice to the water tank or use the supplied cold storage for added cooling.
29. Timer: Sets timer-off in increment of 1 min.
• Timer can be set between 1min to 7.5 hours.
• TIMER indicator will illuminate and LED panel will display the set time.
• To remove timer and operate unit continuously, press button repeatedly until indicator light
and display goes off.
30. Oxygen Bar with Negative ion.
• Fan releases negative ions into the air.
• Operates automatically when unit is turned on.
NOTE: Water must be added to the water tank before using the COOL function.
• Open the front door by the pulling gently on the handle.
• Add water to the tank. Do not overfill.
• For added cooling,add ice to the tank or place the icebox in the tank and put cold storage along
the track.Icebox and cold-storage must be placed in the freezer for at least 1 hour before
use.(Fig.1)
• Power supply should be disconnected before filling to prevent electrical parts from damage.
P-6
Fig 1