Safety Instructions - ANSMANN POWER 2 GO 120+ Manual De Instrucciones

GB
OperAtING INstrUctIONs power2Go 120+
FeAtUres
> Voltage inverter 12 V DC to 220 V AC
> Attractive metal housing
> Fits to each cupholder
> Incl. USB-outlet
> For electronic equipment with a rating up to 120 W (portable TV, DVD player,
laptop/organizer, battery charger, radio, working lamp etc.)
> For Class 2-devices only ( with european flat hexagon plug)
sAFety INstrUctIONs
> Please read these operating instructions carefully before use
> Keep the device away from damp or wet (dry location use only)
> In order to avoid the risk of fire and/or electric shock, the device must be protected
against high humidity and water
> Do not plug in the device if there are any signs of damage of the housing, cables or
connectors. In the case of a defect, please return to an authorized service centre
> Keep out of reach of children
> Do not attempt to open or disassemble the device
> Disconnect the device from the power outlet after use
> Do not operate the device without adult supervision
> To clean the device, please disconnect it from the power outlet and use a dry cloth only
> Do not use or store the device in direct sunlight, danger of overheat
IMpOrtANt
> Can be used whether the engine is running
> Can be used for up to 2 hours whether the engine is not running (depending to
the car battery)
> Low battery voltage will be indicated with a buzzer. If the voltage is to low the device
will cut off automatically
> Remove the car plug of the inverter from the car lighter socket if you want to start or to
stop the engine
> Remove the car plug from the car lighter socket after using
> The contacts of the car plug can become hot. Avoid touching the contacts.
Danger of fire!!
> If the load of the connected equipment exceeds 120 W, the device will automatically
cut off.