Maintenance And Cleaning - ANSMANN POWER 2 GO 120+ Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
> If the safety instructions are not followed, this may cause damage to the device or
serious injury to the user
AtteNtION
Only use the DC-AC inverter with devices with european flat hexagon plug! It ´ s not allowed to
use devices with earthpin. It ´ s not allowed to use this DC-AC inverter with any adaptor between
inverter and electronic device.
Danger to your life!!!
INdIcAtOr
LED blue „Power" (2): Stand by
OperAtION
Connect the car plug (5) to the cigarette lighter socket (12 V DC) of the car; boat, camper etc.
Ensure that the supply to the cigarette lighter socket is on. Some vehicles require the ignition to
be switched on.
The blue LED "Power" (2) shows that the device is on. Contact the electrical equipment with max.
120 W to the DC- AC inverter by using the European flat hexagon plug.
MAINteNANce ANd cleANING
To clean the device, disconnect it from power. Please only use dry clothes to clean the device.
tecHNIcAl dAtA:
Input voltage:
Low battery voltage alarm:
Low battery voltage Cut off:
Output voltage AC:
Output power AC:
Frequency:
Output voltage USB:
Output power USB:
Efficiency:
Stand By current:
12 V (DC)
10.2 V (+/- 0.5) V battery voltage
9.6 V battery voltage
220 V (AC)
120 Watt
50 Hz
5 V (DC)
2.5 Watt
> 90 %
< 0.3 A

Publicidad

Tabla de contenido
loading

Tabla de contenido