Antop AT-401 Manual De Instrucciones página 5

1.4 For Indoor Use, with Table Stand
To remove antenna hardware from backside of unit, release fastening bolt by turning clock-
wise. Attach the Table Stand to the bottom of antenna.
Pull Down
Clockwise
2 / Connecting
2.1 For Outdoor Use, Mast Pole or Wall Mount Prepping for Connection
2.1.1 Select entry point to house. Drill hole under the eaves at entry point. Attach coaxial cable
with water proof cap end to connector in the antenna. For Vertical Wall Mount utilize U-shape
coaxial cable setup to prevent water from entering interior of antenna casing. For Wall Mounts,
attach antenna back to hardware already mounted to wall. With antenna fixed to either a mast
pole or an exterior wall, feed lose end of coaxial cable through drilled opening.
1.4
2.1.1
4