Antop AT-401 Manual De Instrucciones página 6

2.2 For Indoor Use, in Attic placement, Prepping for Connection
Select entry point to house. Drill hole at entry point. Attach coaxial cable with water proof cap
end to connector in the antenna. Attach antenna back to hardware already mounted to beam
or wall, or just use the table stand for placement. Feed lose end of coaxial cable through drilled
opening.
2.3 If you haven't already done so, attach coaxial cable to connector in
the antenna
Connect other end of the coaxial cable to the ANTENNA/CABLE IN connector on the back
of the TV or converter box.
3 / Setting and Scanning
In the TV's setup menu, set the mode to "Antenna" or "Air", then, set TV to "Scan" for channels.
Consult the TV manual for detailed instructions.
5
ANT/IN
CABLE IN
CHANNEL SCAN
scanning for channels
2
Back of TV
3