Tool Specifications - Bostitch FN1664 Manual De Operación Y De Mantenimiento

All demensions in inches unless otherwise specified.
Description
Engine Type
Operation Pressure Range
Maximum Operation Pressure
Fastener Type
Fastener Gauge
Fastener Range
Magazine Capacity
Length
Width
Height
Weight
Operating Pressure:
70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The FN1664 requires 3.9 cubic feet per minute or C.F.M. (110.4 liters per minute or LT/MIN) of free air at 80PSI
(5.6 kg/cm 2 ) to operate at a rate of 60 fasteners per minute. To determine the appropriately sized air
compressor, take the actual rate at which the tool will be run and compare the required C.F.M. (LT/MIN) to the
compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm
For example, if your fastener usage averages 30 fasteners per minute, you need 50% of the tools C.F.M.
required to operate the tool at the rate of 60 fasteners per minute. In this case, be sure that your air compressor
can deliver a minimum of 1.90 C.F.M. (55.2 LT/MIN) at 80 PSI(5.6 kg/cm
Tool Model
FN1664
FN1664
FN1664
FN1664
FN1664
* Stainless steel fasteners also available in certain sizes. Visit www.BOSTITCH.com for further details.
NOTE:
BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve
maximum perfomance when used with precision BOSTITICH fasteners engineered to the same exacting
standards. BOSTITCH cannot assume responsibility for product performance if our tools are used with
fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH
fasteners and accessories.
FN1664
16ga Finish Nailer
Oil-Free
70-120 PSI (4.9 to 8.43kg/cm
120 PSI (8.43 kg/cm
SB16 Series
16 Gauge
1" – 2-1/2" (25mm–63mm)
110
11-7/8" (301.6mm)
3-3/8" (85.7mm)
11-3/8" (288.9mm)
3.9 lbs. (1.7kg)
2 ). Select the operating pressure within in this range for best fastener
Fastener Type
Straight Finish Nails

TOOL SPECIFICATIONS

2 )
2 )
2
).
FASTENER SPECIFICATIONS
Fastener SKU
SB16-1.25
SB16-1.50
SB16-1.75
SB16-2.00
SB16-2.50
-5-
2 ) for optimum performance.
Gauge Length
16 1-1/4" (32mm)
16 1-1/2" (38mm)
16 1-3/4" (45mm)
16 2" (50mm)
16 2-1/2" (63mm)