Oven Timer Operation - Teka HS C Manual Del Usuario

oVEN TIMER opERaTIoN

programming the Buzzer
1. Touch
or until the
display starts flashing, then press
indication '00:00' will appear on the display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time. The
bol will flash slowly.
3. Once the time has expired, an acoustic sig-
nal will sound for 90 seconds and the
symbol will flash quickly.
NoTE
With the Buzzer function, the oven will not
turn off when the time expires.
4. Touch any key to stop the alarm. The
symbol will then disappear.
If you wish to modify the time on the buzzer, re-
peat the steps shown. Upon entering the timer
control, the time currently remaining will appear,
which you will be able to adjust.
NoTE
With the Buzzer function, the remaining time
will show permanently on the display. With
this programmed function, it is not possible
to view the time or the total programmed
cooking time.
programming Cooking Time
1. Touch or until the
display starts flashing, then press
indication '00:00' will appear on the display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
3. Select a function and a cooking temperature
symbol on the
. The
4. Once the cooking time is up, the oven will
or . You
5. Touch any key to stop the alarm and turn off
sym-
6. Set the controls to the
You can change the remaining cooking time at
any time by touching
symbol starts to flash quickly. Now press
change the time.
With the Cooking Time function, the remain-
ing time will show permanently on the dis-
play. You cannot see the current time on the
display when this function is set.
programming the Cooking stop Time
1. Touch
2. Select the time after which you want the
3. Select a cooking function and temperature.
4. When the cycle is finished, the oven will turn
symbol on the
. The
5. Touch any sensor to stop the alarm and to
or . You
6. Set the controls to the
down from the selected time.The
bol will flash slowly.
using the oven commands.
turn off, an alarm will sound and the
symbol will flash quickly.
the symbol. The oven will switch on again.
the oven.
NoTE
or until the
display starts to flash and press
see the current time on the timer display.
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time. The
bol will flash slowly.
itself off, a buzzer will sound and
will flash quickly.
turn off the , symbol. The oven will switch
on again.
the oven.
English
sym-
position to turn off
or until the
to
symbol on the
. You will
or . You
sym-
symbol
position to turn off
27
User's Guide