Worx WG209 Manual Del Usuario página 8

SYMBOL
To reduce the risk of injury, user
must read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Do not expose to rain
8
Remove plug from the mains
immediately if the cable is
damaged or cut.
DANGER – Keep hands away from
blade
24˝/4A Electric Hedge Trimmer
OPERATING INSTRUCTIONS
WARNING! Do not use the product
without attaching the guard and front
handle.
1. ASSEMBLY OF THE GUARD
(See Fig. A)
Insert the Safety Guard(5) into the slot as
illustrated in Fig A.; making sure it is securely
attached.
Use two screws to fix the guard securely.
2. FRONT HANDLE ASSEMBLY
The Front Handle (4) must be assembled
before use:
1) Attach the Front Handle to the housing.
Make sure the protruding marks on
the Front Handle fit perfectly into the
matching indentation on the housing.
(See Fig. B & C)
2) Tighten the 4 screws already on the
handle.
3) Check whether handle is firmly secured, if
not retighten the screws.
3. ORANGE CORD KEEPER (See Fig. D)
The Orange Cord Keeper is supplied to
reduce strain on the power cord. To use
this feature, form a loop at the end of the
extension cable and bring this through the
opening at the bottom of the orange code
keeper, then wrap the end of the loop around
the keeper and pull to tighten.
4. STARTING AND STOPPING
(See Fig. E)
TO START YOUR HEDGE TRIMMER
There are two switch levers fitted in your
Hedge trimmer (2&3).
Depress the Safety Switch Lever (2) then the
Switch Lever (3) to start. (See Fig. E)
TO STOP YOUR HEDGE TRIMMER
Move Hedge trimmer away from cutting area
before stopping.
To stop, release one of the switch levers.
(See Fig. F)
WARNING: If any parts are missing,
damaged or broken, do not operate
your Hedge trimmer until all damaged parts
have been replaced or repaired. Failure to do
EN