Nice HSDIM23 Instrucciones Y Advertencias Para La Instalación Y El Uso página 6

Caution! – When dip-switch 4 is set to OFF and dip-switch 5 set to ON this excludes
compliancy with standard EN50131
Table 2 - Jumper Programming
Jumper Status
JP1 OPEN
CLOSED
3.2 - Signals
HSDIM23 has 1 LED (L1 - fig. 2) and a buzzer that emits acoustic signals. See table 3.
The low battery signal is activated 15 to 30 days in advance before they are totally dis-
charged. However, the batteries should be replaced as soon as possible after this signal.
When the batteries are partially discharged, incorrect alarm signals may be generated.
Table 3
LED
Red
BUZZER
1 Beep
3+3 Beeps
5 Beeps
4
Function
Alarm signal with single radio code
Consecutive second alarm signal with second radio code
Function
Intrusion alarm
Function
Alarm signal (Intrusion, Tampering)
Sensor programming (battery insertion)
Low battery signal