Care And Cleaning - George Foreman GFO3320 Manual De Uso Y Cuidado

Ocultar thumbs Ver también para GFO3320:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important: Use caution when removing lid.
4. When finished cooking, turn temperature control probe to OFF position.
Temperature probe indicator light will go out. Unplug and allow grill to
cool before disassembling and cleaning. See CARE AND CLEANING.
Note: Temperature control probe may be turned to setting 1 to keep foods warm for
short periods of time.
Note: Use only plastic or wooden utensils on grill surface.
Caution: Grill surfaces are hot during use. Allow grill, drip tray, lid and grill base to cool
completely before handling and cleaning.
TE M PER ATU R E GAU GE
Important: An artificially low temperature will be shown on the
temperature gauge if excessive amounts of food are placed on the grill
plate or if the grill lid is frequently removed during cooking. Regardless
of this use, the grill plate will continue cooking at the temperature setting
selected on the control probe.
USI NG IN D OOR S
• To use your grill indoors, simply unclip grill base from upper pedestal tube, then lift
grill base off pedestal tube and place on a heat-resistant surface.
Important: Never use grill without the grill base securely in place.
Caution: Some countertop finishes are more affected by heat than others; make sure
the countertop surface can withstand temperatures of 150°F to prevent discoloration
or other damage to countertop surface.
CAR E AN D CL EAN IN G
Caution: To avoid accidental burns,
allow your grill to cool completely.
This product contains no user serviceable parts. Refer service to qualified service personnel.
1. Unplug and allow grill to cool before disassembling and cleaning. Thoroughly
clean all parts after each use.
2. Remove temperature control probe (DO NOT IMMERSE). Wipe with a damp cloth
and dry thoroughly.
3. Remove grill base and empty drip tray.
4. Wash grill plate, drip tray and lid with warm, soapy water. Wipe dry.
5. Reassemble grill parts as required.
6. Place the grill cover full-length over the entire grill assembly.
7. Grill cover logo and handle will be visible externally, when assembled correctly.
Important: Do not use metallic scrubbing pads, steel wool or any abrasive cleaners
to clean any part of your grill; use only nylon or nonmetallic scrubbing pads.
Caution: Temperature control probe receptacle must always be completely dry before
use. Make sure receptacle is dry before inserting control probe.
Note: This product is only intended for outdoor storage when cover is in use.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido