2. ASSEMBLY
Take either the left or right leg (4), press and
hold the red button (a) and extend the leg then
release the red button.
Take the other leg and follow the above pro-
cedure.
Take the legs and noting the orientation in the
diagram insert the legs into the top of the seat
unit adjusting brackets.
To lift the seat unit to the top of the legs sim-
ply press and hold the red buttons on the
seat unit adjustment brackets and lift. There
are six positions to adjust height.
Take out the wheels from the bag, and insert
them into the holes of the rear feet.
EN
3. FIX THE FOOTREST
Place the footrest in the appropriate position,
follow the figures to insert the screws. Then
Fix the screw with the nut.
4. FIXING THE FEET
Turn the highchair upside down. Please note
that each of the four legs has a sprung loaded
pin.
Line up one of the feet so that the small hole
in the top of the foot lines up with the pin.
Push firmly on the foot at either end until each
of the two sprung pins click into place within
the small hole in the foot. Repeat for other
foot.