Home Decorators Collection 14425 Guía De Uso Y Mantenimiento página 12

Assembly — Hanging the Fan (continued)
7
Making the electrical connections
WARNING: To avoid possible electrical shock, ensure the
electricity is turned off at the circuit breaker or main fuse box
before wiring.
WARNING:
Check to see that all connections are tight,
including the ground, and that no bare wire is visible at the
wire nuts, except for the ground wire.
Follow the steps below to connect the fan to your house
supply wires. Secure the wire nuts (GG) supplied with your
fan by wrapping the connections with electrical tape.
Motor to receiver electrical connections:
□
Connect the black wire from the fan to the black wire
marked "TO MOTOR L" from the receiver (L).
□
Connect the white wire from the fan to the white wire
marked "TO MOTOR N" from the receiver (L).
□
Connect the blue wire from the fan to the blue wire
marked "For Light" from the receiver (L).
Receiver to house supply wires electrical connections:
□
Connect the black (hot) wire from the ceiling to the
black wire marked "AC in L" from the receiver (L).
□
Connect the white (neutral) wire from the ceiling to
the white wire marked "AC in N" from the receiver
(L).
□
If your outlet box (1) has a ground wire (green or bare
copper), connect it to the fan ground wires; otherwise,
connect the hanging ball (E) ground wire to the
mounting bracket (B).
□
Secure the wire connection with a plastic wire nut
(GG) provided with the electrical hardware.
□
After connecting the wires, spread them apart so that
the green and white wires are on one side of the
outlet box (1) and the black and blue wires are on the
other side. Carefully tuck the wire connections up
into the outlet box (1).
Black
Black
L
Black
Black
GG (x6)
H
12
1
White
White
Blue White
Blue White
Green
Green