Warranty Exclusions; Description Of The Machine - breviglieri DOBLE-MAXI DOBLE Instrucciones De Empleo Y Mantenimiento

1.2.1 WARRANTY EXCLUSIONS

(Besides the circumstances indicated in the supply contract) the warranty becomes void:
▪
When the damage can be ascribed to insufficient maintenance.
▪
When, following repairs made by the user without the Manufacturer's consent or owing to the installation of spurious spare
parts, the machine has been subjected to changes and the damage is ascribable to these changes.
▪
When the machine has been hitched to tractors whose power rating exceeds the value given in the "Technical Specifica-
tions" table in this manual.
▪
When the user has failed to comply with the instructions in this manual. Damage deriving from negligence, carelessness,
bad and improper use of the machine or incorrect manoeuvres by the operator are also excluded from the warranty. Remo-
val of the safety devices with which the machine is equipped shall automatically void the warranty and relieve the Manufac-
turer from all relative liability. The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be returned Carriage Free.

1.3 DESCRIPTION OF THE MACHINE

doble and maxi doble rotary tiller bears «CE» marking in compliance with the European Union standards described in directive
2006/42/EC and successive modifications, as stated in the declaration of conformity with which each machine is equipped.
1. Central bearing frame with three-point hitch
2. Upper 3-point hitch
3. Connection point to lift the machine
4. Identification plate
5. Lower 3-point hitch
6. Main driveline support
7. Central transmission unit
8. PTO to engage main driveline
9. Rh upper steerage hoe frame
10. Lh upper steerage hoe frame
11. Side gearbox transmission
12. Side driveline
13. Driveline shield
14. Hydraulic cylinder for harrow opening/closing (2 pcs)
15. Hoe blade rotors
16. Bonnet adjuster screw
17. Hydraulic circuit pipes
18. Safety guards
19. Rear roller (tines, cage, packer)
20. Hydraulic cylinder to adjust the tilling depth
21. Tine rotor with spinning phase
doble - maxi doble
Fig. 1
- 21 -
macchine agricole
4
21