Maintenance And Cleaning - THERMEx INTEGRO Instrucciones De Uso

Ocultar thumbs Ver también para INTEGRO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

48
THERMEX INTEGRO

MAINTENANCE AND CLEANING

Always disconnect the power before cleaning.
The hood must be cleaned regularly to ensure optimal operation and long service life.
Grease and dust debris collect in the filter and may risk igniting with insufficient cleaning.
The hood should be cleaned inside and out frequently to avoid grease stains on walls or other surfaces.
DAILY CLEANING
For cupboard-integrated, free-hanging and wall-mounted hoods, Thermex recommends that the grease filter be wiped with a damp cloth after
each cooking session. It requires very little effort every day to keep your cooker hood clean and effective.
Steel surfaces are cleaned with a damp cloth and detergent, and finished with a metal polish (can be purchased with the item number
499.99.9999.9).
Lacquered surfaces should be cleaned with a damp cloth with detergent/washing-up liquid. Never use abrasives.
CLEANING THE GREASE FILTERS
Grease filters should be cleaned as needed. Thermex recommends as a minimum that the filter is cleaned at the following intervals, depending on the
fat used for frying:
Frying margarine - filter cleaned every 3 weeks
Liquid margarine - filter cleaned every 2 weeks
Oil - filter cleaned once per week
Deep fat frying - filter cleaned 2-3 times per week
The grease filters are cleaned in the following way:
Remove the grease filters by pulling on the filter locking mechanism to loosen the filters from the hood.
Place the filters in warm soapy water and clean if necessary with a soft brush.
Rinse with warm water.
Leave the filters to dry on a dishcloth or similar.
Repeat the process if necessary.
Re-attach the filters.
The filters can also be washed in the dishwasher. Please note however that machine washing can result in discolouration of the filters. Discolouration
does not affect performance.
REPLACING THE RECIRCULATION FILTERS
If recirculation filters are used, these cannot be washed, but must be replaced when needed. Thermex recommends that the recirculation filters be
replaced at least 2-4 times per year.
B 513052168222032016

Publicidad

Tabla de contenido
loading

Tabla de contenido