KOBE CH2230SQ-1 Instrucciones De Instalación Y Manual De Operación página 13

Ductwork Installation
10. Use steel pipe to connect the exhaust on the hood
to the ductwork. Use duct tape to make all joints
secure and air tight.
Install Accessories (For Baffle Filter models)
11. Place baffle filters underneath the hood. (Figure 7)
Install Accessories (For Oil Container models)
12. Place the oil container (round) into keyhole under
each safety screen. Turn clock-wise until firmly in
place. (Figure 8)
13. Slide oil container (oval) into plastic slot behind
each safety screen as shown in Figure 9.
Final Installation
14. Turn power ON in control panel. Check all lights
and fan operation.
15. Make sure to
homeowner.
leave this manual
Figure 7
Figure 8
for the
Figure 9
10