Troubleshooting Guide; Part List - Urrea 24701 Manual De Usuario

E N G L I S H

TROUBLESHOOTING GUIDE

TROUBLES
• Jack will not operate
• Ram lowers under load
• Jack will not operate
• Ram lowers under load
• Handle moves when jack is
under load
• Jack will not operate
• Ram will not lift all the way
• Pump stroke feels spongy
• Oil leaks from oil plug

PART LIST

Description
1 Angle Steel Feet
2 Main Frame
3 Connecting Plate
4 Spreader
5 Handle Base
6 Press Platform
7 Support Rod
8 Handle
9 Stud
10 Nylon Lock Nut M12
11 Jack Plate
10
POSSIBLE SOLUTIONS
• Make sure the release valve is closed. Check release valve.
• Valves may be blocked or may not be fully closed. To Flush Valves:
1. Lower the saddle and close the release valve.
2. Manually lift the saddle several inches.
3. Open the release valve and force the saddle down as quickly as possible.
• Jack may be low on oil. Check and refill if needed.
• Jack may require bleeding the air out of the system.
• Unit may have too much hydraulic oil inside. Check fluid level.
Qty. Description
2 12 Hook
2 13 Wing Nut
4 14 Tension Spring
1 15 Hex Bolt M12x105
1 16 Press Plate
2 17 Upper Cross beam
2 18 Bottle Jack
1 19 Plastic Clip
2 20 Hexagon Socket Head Cap Screw M8x20
12 21 Lock Washer Ø8
1 22 Hex Bolt M5x16
Qty. Description
2 23 Nylon Lock Nut M5
2 24 Hex Bolt M8x20
2 25 Nylon Lock Nut M8
4 26 Hex Bolt M12x30
2 27 Pressure Gauge
1 28 Copper Sheet B
1 29 Elbow
1 30 Copper Sheet A
2 31 Connector
2
1
Qty.
1
9
9
4
1
1
1
1
1