Nosepiece Table; Safety Instructions - Gesipa AccuBird Instrucciones De Manejo Con Lista De Repuertos

1.4. Nosepiece table

Rivet Ø (mm)
Rivet body material
2,4 Alum
3,2 CAP-Alum, CAP-CU
3 and 3,2 Alum, CU, Steel, Stainless Steel, Stinox,
Alum/Alum, PG-Alum, PG-Steel, PG-Stainless Steel
4 Alum, CU, CAP-Alum, CAP-CU
4 Steel, Alum/Alum, PG-Alum
4 Stainless Steel, Stinox, PG-Steel, PG-Stainless Steel
4,8 and 5 Alum, CAP-Alum, CAP-CU, PG-Alum
4,8 and 5 Steel, Alum/Alum
4,8 and 5 PG-Steel
6 Alum
BULB-TITE Ø (mm)
Rivet body material
4 Alum/Alum
5,2 Alum/Alum
6,3 Alum/Alum, Steel/Steel
BULB-TITE Ø (mm)
Rivet body material
6,3 Alum/Alum, Steel/Steel
* available as special accessories. Elongated nosepieces and other special nosepieces are available
upon request.
** Also available as a complete set (# 50) part no. 725 9290.

1.5. Safety instructions

Blind rivet setting tool AccuBird
Caution:
Following safety rules must be followed
for adequate protection against electrical schock,
injuries or fire hazards:
•
The riveting tool should be used exclusively
to set blind rivets.
•
Do not overload the tool; Work within the
prescribed work capacity.
•
Do not expose the tool to humidity or rain,
do not operate the tool close to inflammable
substances or gases: Risk of explosion!
•
Ensure that the battery is properly secured in
the tool handgrip.
•
Remove the battery when the tool is not in use
and for repair/servicing operations.
•
Do not use the tool as a hammer.
10
Jaw Pusher BT
54**
•
®
•
•
•
•
•
•
Nosepiece
17/18**
17/18**
17/24*
*
17/24*
17/27*
17/29*
17/29*
17/32*
17/36*
17/36*
Nosepiece
17/26
17/32
17/42
Part.-No.
725 2245
When not in use, keep the tool in a dry closed
room, out of reach of children.
When working with the tool, always carry
protection goggles. Personal protection like
clothes, gloves, safety helmet, non slipping
shoes, ear protectors and protection against
fall are highly recommended.
The air inlets for the engine should not be
ob structed. Do not introduce anything into them.
When depositing the tool, make sure that it
cannot fall down.
Use only genuine spare parts for repair.
Repair work must be carried out by skilled
personal. In case of doubt, always send back
the tool to the manufacturer!
Do not use the tool outside of riveting holes.
The blind rivet could be ejected from the tool.
Never turn the tool towards yourself or towards
another person.
Part.-No.
725 2075
725 2075
725 1583
725 1583
725 2040
725 2059
725 2059
725 2067
725 2083
725 2083
Part.-No.
BT** 725 2202
BT** 725 2210
BT*** 725 2229
Jaws BT Part.-No.
55*** 715 1527