Replacing The Lamp; Technical Specifications - EuroLite Flexilight Manual Del Usuario

Replacing the lamp

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one 12V/5W BA 9s bayonet lamp.
Procedure:
Step 1: Remove the lamp cover from the lamp.
Step 2: Remove the defective lamp from the lamp-socket.
Step 3: Insert the new 12V/5W BA 9s bayonet lamp into the lamp-socket.
Step 4: Attach the lamp cover on the lamp.

TECHNICAL SPECIFICATIONS

Article:
Power supply:
Power consumption:
Dimensions(LxWxH):
Weight:
Fitting lamp:
Article:
Please note: Every information is subject to change without prior notice. 14.10.2008 ©
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
Do not operate this device with lamp cover removed!
80702305, 8070230I, 80702349
230 V AC, 50 Hz ~
via included AC 12 V
power unit
5 W
120 x 75 x 400 mm
0.5 kg
OMNILUX 12V/5W BA 9s bayonet
90605500
11/19
80702350, 80702351, 80702353, 80702355
12 V AC, 50 Hz ~
6 W
80 x 30 x 350 mm
0.5 kg
OMNILUX 12V/5W BA 9s bayonet
90605500
00026842.DOC, Version 2.2