Tabla De Contenido; Introduction - Bostitch DSW-3519 Manual De Operación Y De Mantenimiento

INTRODUCTION

The BOSTITCH Carton Closing stapler is a precision-built tool, designed for high
speed, high volume stapling. This tool will deliver efficient, dependable service when
used correctly and with care. As with any fine power tool, for best performance
the manufacturer's instructions must be followed. Please study this manual before
operating the tool and understand the safety warnings and cautions. The instructions
on installation, operation and maintenance should be read carefully, and the manuals
kept for reference. NOTE: Additional safety measures may be required because of your
particular application of the tool. Contact your BOSTITCH representative or distributor
with any questions concerning the tool and its use. BOSTITCH Fastening Systems,
701 E. Joppa Road, Towson, MD 21286.
INDEX
INTRODUCTION .................................... 2
LIMITED WARRANTY ............................ 3
DEFINITIONS: SAFETY GUIDELINES ... 3
GENERAL POWER TOOL SAFETY
WARNINGS ........................................... 3
STAPLER SAFETY WARNINGS ............. 5
TOOL LOADING SAFETY ...................... 6
OPERATIONAL SAFETY ........................ 6
Trigger Operated............................. 6
Replacement parts ......................... 6
SYMBOLS ............................................. 6
BATTERY / CHARGER SAFETY ............ 7
Important Safety Instructions
for All Battery Packs ....................... 7
The RBRC™ Seal ........................... 8
Important Safety Instructions
for All Battery Chargers .................. 8
Chargers ........................................ 9
Charging Procedure ....................... 9
Charge Indicators ........................10
Important Charging Notes ............10
NOTE:
BOSTITCH tools have been engineered to provide excellent customer satisfaction and
are designed to achieve maximum performance when used with precision BOSTITCH
fasteners engineered to the same exacting standards. BOSTITCH cannot assume
responsibility for product performance if our tools are used with fasteners or
accessories not meeting the specific requirements established for genuine
BOSTITCH nails, staples and accessories.
Storage Recommendations ..........11
SPECIFICATIONS ................................11
Tool ...............................................11
Part/Staple Chart ..........................11
Corrugate Thickness Chart ...........12
Fastener Specifications .................12
ASSEMBLY ..........................................12
Loading The Tool .........................12
Battery Installation ........................12
OPERATION .........................................13
Operating the Tool ......................13
Tool Operation Check ...................13
ADJUSTMENTS ...................................14
Clinch Adjustment .......................14
Depth Of Drive Adjustment ..........15
Magazine Removal ......................15
Jammed Staple Removal .............15
Leg Length Adjustment ................16
MAINTAINING AND SERVICING THE
POWER TOOL .....................................16
TROUBLE SHOOTING .........................16
2-ENG