Becken BTE3511 Manual De Instrucciones página 14

Time setting
Press the
can use
Press again, and the minutes will start to blink;
Use or
Pressing
to select the date (1-Monday, 2-Tuesday, 3-Wednesday, 4-Thursday,
5-Friday, 6-Saturday, 7-Sunday);
Finally, press
If there is no pressing, the blinking will stop after 5 seconds and the
setting will end automatically.
Temperature setting
Press or
temperature will start to blink.
Press or
temperature ranges from 10 ºC ~ 35 ºC. If no buttons are pressed, the
blinking will stop after 5 seconds and the setting will end automatically.
Timer setting (timer mode)
Hold for 3 seconds until the
At the same time, the clock will return to 00:00 and start to blink.
This means the timer
setting has started:
14
AF Manual Instruções Emissor Térmico 1500W Mod.BTE3511 A5 EN.indd 14
button and the hour digits will start to blink, then you
or to select the required hour (0 ~ 23);
to select the minute (0 to 59);
again, the date will start to blink, then use
to confirm and finish the setting.
to set the target temperature directly, and the
to set the target temperature. The adjustable
symbol is displayed.
or
29/05/2018 19:06