Publicidad
MAST TO BOOM PLATE ASSEMBLY
ENGLISH
The clamping plate BOOM / MAST (EA013016) 250X100X6mm consists of 12 holes; 4 thick for round U-bolts and 8 small holes to joint the
(EA010083) securing the BOOM.
The 4 holes are thicker function that make the greatest force on the mast by means of M8 round U-bolts. Round U-bolts M8 (A-0163), are
secured by washer DIN 9021 M8 and nut DIN 934 M8 provided in the same U-bolt, and fixed to the mast with mounting block (23035.50).
Detailed drawings for further illustration:
(EA013016)
(EA013016)
Front view from Mast
DIN 985 M6
Front view from BOOM
The boom is tightened to the plate in same manner, see below, screws (DIN 912-9660) plus washer and nut.
(A-0163)
(23035.50)
(S912-9660)
(S985-906)
(S127-96)
Side view from Mast
Side view from BOOM
Publicidad
