Resumen de contenidos para Project Source 105026-005
Página 1
0650148, 0650149 Project Source is a registered trademark of ® LF, LLC. All rights reserved. Project Source sont des marques de commerce ® déposées de LF, LLC. Tous droits réservés. Project Source es una marca registrada de LF, LLC. ®...
Página 2
SAFETY INFORMATION/CONSIGNES DE SÉCURITÉ/INFORMACIÓN DE SEGURIDAD WARNING • Determine ground side of track (has indented groove on face and two internal copper bars) and connector (side of connector with two metal tabs). Can only be assembled if grounds are aligned though this is not a grounded accessory.
Página 3
ASSEMBLY INSTRUCTIONS/INSTRUCTIONS POUR L’ASSEMBLAGE/INSTRUCCIONES DE ENSAMBLAJE 1. Loosen set screw (A). Identify and align connector (B) ground tab with ground side of track section (not included) and insert connector (B) into track section until it snaps into place. Tighten set screw (A). See Fig. 1. Note: The ground side of connector (B) is the side with the two metal tabs.
Página 4
CARE AND MAINTENANCE/ENTRETIEN/CUIDADO Y MANTENIMIENTO • This unit is suitable for indoor use only. • Clean this unit periodically. Clean only using water and mild soap; dry with a soft cloth. Never use rough cloth, abrasives or chemical cleaners containing acids or harsh solvents. •...
Página 5
Printed in China Imprimé en Chine Impreso en China Project Source® is a registered trademark of LF, LLC. All rights reserved. Project Source® sont des marques de commerce déposées de LF, LLC.