HEIDENHAIN ND 1202T TOOL-CHEK Instrucciones De Instalación página 11

ND 1202T TOOL-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de
1. How to use these instructions
The installation instructions contained in this document provide the information necessary
to install this product. This information is just a part of the information available in the
ND 1202T TOOL -CHEK Operating Instructions, 734905-xx. The Operating Instructions can
be downloaded from www.heidenhain.de.
These instructions are intended for use by personnel qualified to install, operate and
maintain the HEIDENHAIN ND 1202T TOOL-CHEK.
A qualified person is someone whose technical education, knowledge and experience,
as well as knowledge of the relevant system of rules qualifies the person to evaluate the
delegated task and recognize possible hazards.
Messages shown in these instructions
The following examples show how safety, property damage and general advice messages
are shown in these instructions. Read and understand these types of messages before
proceeding to prevent personal injury or property damage.
Messages about other safety messages. These supplemental directives do
not address specific hazards, but instead provide information that promotes
awareness and use of specific safety messages.
Warning!
Messages that provide information about the nature of a hazardous situation,
the consequences of not avoiding a hazardous situation, and methods for
avoiding a hazardous situation.
Notice
Messages that provide information primarily about situations that can lead to
property damage, the potential consequences of not avoiding the situations, or
methods for avoiding the situations and general advice messages.
Fonts used in these instructions
Items of special interest or concepts that are emphasized to the user are shown in bold
type.
2. Model information
This guide covers multiple products. Whenever possible the product name shown on
the cover page is used. When a feature pertains to a specific product variant the specific
product name or the product name and the ID are shown. In some cases an "x" is shown
in the product name to represent the described feature is available on multiple product
variants and types.
This guide covers specifications, mounting and installation for the following models:
Product name
ND 1202T TOOL -CHEK
Notice
Verify that these Installation Instructions are valid by matching the Index on the
label 1 with the Index listed at www.heidenhain.de. If these instructions are
not valid, download the applicable Installation Instructions from
www.heidenhain.de.
An index may not be present on all products.
ID
676483-xx
Contents
How to use these instructions ................. 11
Model information .................................... 11
Safety ........................................................12
Specifications ............................................12
Mounting ...................................................13
Installation .................................................14
Operating elements ..................................16
Initial power-up ..........................................17
Maintenance .............................................17
ND 1202T
1
TOOL -CHEK
Product name
ID 123456-xx
SN 12 345 678 x
ID
Index
ID label
English
xx
11