Trust 18034 Guía De Instalación Rápida página 3

Eewave Wireless Headset - USER'S MANUAL
Installation
A. Headset
1
B. LED light (B1/B2)
C. USB connection
D. USB charge cable
E. USB receiver
F. Media Buttons
Play/ Pauze
Previous
Next
Volume -
Volume +
- Before using the headset needs to be fully charged.
2
- Connect the USB charge cable to the headset and your computer to charge the headset.
- When connected the (B2) LED light will turn red when charging.
- The (B2) LED light will go off when the headset is completely charged.
- Connect the USB receiver to your computer
3
- Turn on the headset
- The (B1) LED light will turn blue when it's connected.
Configuration
Windows 7/ Vista
Go to 'Playback Devices' to configure the headset.
4
Set the 'Wireless Audio' as your default device
5
- Select the 'Recording' tab
6
- Set the 'Wireless Audio' as your default device
- Double click the 'Microphone'
Set the level to 100%
7
Windows XP
Go to 'Adjust Audio Properties' to configure the microphone
8
- Set the default device to 'Wireless Audio' (voice and recording)
9
- Go to the 'Voice' tab.
10 Click the 'Volume' of the Voice recording.
Set the level to 100%
11
2