NSK PTL-CL-LED Manual De Operación página 3

1. Features
· There is no generation of heat in the light source, power saving and long life LED.
· It can adjust the amount of water by water adjustment ring. ( PTL-CL-LED III, KCL-LED,
SCL-LED )
· Power supply for illumination is regardless of polarity. You can use variety of unit.
· Non-Retraction Valve which prevents the water flow back of water is built in.
2.Setting
CAUTION
·Do not connect or disconnect the hose or handpiece until air pressure has
completely stopped.
·Follow the instrument manufacturer's instructions.
·This coupling can connect with a hose with light and ISO
Standard 4 hole. ( Fig.1 ) If it connects with a hose without light
function, the light terminal will deform and it will become a
cause of failure.
2
( 1 ) Connecting
1 ) To connect, align and insert carefully and firmly the pin of the coupling into the pin holes
of the hose, and fasen the hose nut securely.
Coupling cap as attached. ( PTL-CL-LED/PTL-CL-LED III )
Wrench ( KCL-LED,SCL-LED ) ( Fig.2 )
2 ) Insert handpiece into coupring straight until it click.
CAUTION
Ensure the handpiece is attached tightly to the
coupling.
Fig. 1
PTL-CL-LED III
KCL-LED
1
SCL-LED
Coupling Tighten
Connector Ring
Loosen
2
Fig. 2
Fig. 3
3