Cable Management - CHIEF iC Serie Instrucciones De Instalación

Installation Instructions
4 ADJUSTMENT
1. To adjust pitch tension, slightly loosen or tighten adjustment screw as required using hex key (K).
NOTE:
If display is mounted to swing arm (A) then first disconnect all cables and remove display
(Refer to "INSTALL DISPLAY").
2. To adjust extension and swivel tension, slightly loosen or tighten adjustment screws as required using hex
keys (K, L).
1

CABLE MANAGEMENT

5
CAUTION:
pinched by installation of cover (D) or screws (J).
1. Carefully insert cables into cavity located in lower portion of arm assembly (A).
2. Install cover (D) with two screws (J).
All manuals and user guides at all-guides.com
2
Ensure that adequate cable slack exists for movement of display, and that cables will not be
1
(A)
2
(D)
(J) x 2
iCMPSA4
2
9/16" (14.2mm)
17