The Bluetooth® Karaoke System operates on AC100-240V~ 60/50Hz.
1. Make sure the speaker is off.
2. Insert one end of the AC power cable (included) into the AC socket (3) at the
3. Press the power button to turn the unit on and off.
Note:
• The red charging indicator starts blinking when the device is running out of
battery. Please connect it to power via the AC power cable.
• After 15 minutes of inactivity the device automatically goes into sleep mode. To
exit the mode, press Play/pause/pairing button (23).
• The socket-outlet shall be installed near the equipment and shall be easily
accessible. Please disconnect the mains plug from the AC outlet if the appliance
is not going to be used for a long period of time.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur,
unplug the unit from the mains socket and plug it back in.
K8200_IM1316_V11_303.indb 16
back of the device and plug the other end into any convenient AC~100-240V,
50/60Hz power outlet. Once connected to power, the charging indicator (14)
will light up in red to indicate the device is charging.
LET'S GET STARTED
16
4/8/16 4:26 pm