Cleaning And Maintenance - Concept DV7360 Manual De Instrucciones

OPERATING INSTRUCTIONS
CAUTION
Before using the unit, make sure its surface and covering are dry!
1. Fully uncoil the power cord.
2. Connect the power cord plug to the wall socket.
3. Place the appliance on the part of your body that you wish to warm up.
4. Using the mode selector, select the required level of power 1–3. The power level light indicator goes on accordingly.
We recommend beginning with a lower level of power and then increasing it as needed.
Note: Use level 1 for long-term operation. Higher levels of power are designed for short-term operation or to reach
the required temperature faster.
5. After use, set the mode selector to the 0 position and unplug the appliance from the mains.
Safety switch-off
After 90 minutes of operation, the unit will automatically switch off the warming function. By adjusting the power switch
to the 0 position (off ) the safety switch-off timer will be reset and the unit may be reused.
Storing the unit
Unplug the unit from the mains after use, let it cool down and store it in a safe and dry place. The supply cable must not
be wound around the unit control!
Make sure no sharp folds are created. Never break the body of the unit or the supply cable. Neither pierce the
appliance (e.g. with pins, needles, etc.) nor expose it to sharp items.

CLEANING AND MAINTENANCE

WARNING!
Before cleaning the unit, always disconnect the power cord from the wall outlet!
Prior to handling, make sure the unit has cooled down!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard and sharp objects, as
they may damage the unit's surface! Do not use dry washing!
Never clean the unit under running water, do not rinse it, and do not submerge it in water!
The surface of the appliance must be dry before further use!
DV7360, DV7370, DV7380
EN
37