Safety instructions
•
Before the vehicle is used, switches that might be in the seat (for shutting down
mechanical equipment when the driver leaves his/her seat) must be checked for
.
If malfunctions are detected, the vehicle must not be driven.
–
•
weight during normal use, as the vehicle may otherwise start to move by itself.
–
If you take off the weight from the seat while driving, this will cause the vehicle to stop.
•
Do not indent the bellows while there is load on the driver' s seat.
–
•
Make sure that the
.
•
The driver' s seat is
•
Any conversion or refitting work on a
exclusively in
adherence with the applicable operating, maintenance and installation instructions and in
compliance with all relevant national regulations.
•
and the proper function of the driver' s seat or mounted parts can no longer be
guaranteed.
G uarantee
•
can provide no guarantee for damage resulting from incorrect assembly, use
or repair of the driver' s seats.
•
Further details on the guarantee granted by
delivery note. Warranty claims against
described there are excluded.
20
–
–
–
and must be protected against splashes of water!
by
bear the risk of
, except for the driver's
remains free of
driver' s seat must be performed
or
are stated on the invoice or the
beyond the guarantee obligations
or
and in
or
GB