Country; Intrusion; Eco Mode - Motorola D700 Serie Manual De Instrucciones

D701_IFU_EN_for_EU.book Page 18 Friday, August 24, 2007 5:19 PM
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.
Reset
This will reset your D701 to its default settings.
m d m
1. Press , scroll to ADVANCED SET and press .
d m
2. Scroll to RESET UNIT. Press .
m
3. CONFIRM? is displayed. Press .
NOTE
Entries stored in the phonebook are retained. After reset, depending on your country, the welcome
mode setting may be shown on the handset display.
Default settings
Handset name
Key tone
First ring
Auto pick up
Auto hang up
Ringer melody
Ringer volume
Earpiece volume
Phonebook
Call log
Redial list
Master PIN
Keypad lock
Clock
Alarm
Dial mode
Auto prefix
You can set the D701 to detect a dialling number and replace it with another number. The number
to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits.
m d m
1. Press , scroll to ADVANCED SET and press .
d m
2. Scroll to PREFIX. Press .
m
3. DETECT DIGIT is displayed. Press .
4. Enter the number you want to be detected and press
m
5. Scroll to PREFIX NUM. and press .
6. Enter the number you want it replaced with and press
>
7. Press to return to standby.
18

Country

If you move to another country you can set your phone to be compatible with the network settings
of that country.
NOTE
If you make a mistake during welcome mode country selection, you can also reset your country.
Depending on your country, this option may be displayed as
displayed.
1. Press
2. Scroll
3. Enter the 4-digit master PIN and press
4. Scroll
5. Press

Intrusion

Handset
When an external call is taking place, another handset registered to the base can join in, making
On
the call a 3-way conference, just by pressing
On
To enable this, Intrusion must be switched On.
On
1. Press
On 2. Scroll
3. Scroll
Ring 1
4. Press
High
5. Press
3

ECO mode

Unchanged To reduce the level of power emissions, you can select low power or ECO mode. When the ECO
mode is set to ON, the base transmission power will be reduced.
Empty
To turn ECO Mode to
Empty
1. Press
0000
2. Scroll
3. Press
Off
- A confirmation beep is emitted and the handset display will switch between the handset's
00:00
name and
Off
NOTE
When Eco Mode is set to ON, the handset range will be reduced.
Tone
m
.
m
.
NOT AVAIL
m d m
, scroll to ADVANCED SET and press .
d m
to SEL. COUNTRY. Press .
m
.
u d
or to display the required country.
m
to confirm.
<
.
m d m
, scroll to ADVANCED SET and press .
d m
to INTRUSION. Press .
u d
or to ON or OFF.
m
to confirm.
>
to return to standby.
ON or OFF:
m d m
, scroll to ADVANCED SET and press .
d m
to ECO MODE and press .
u d m
or to highlight ON or OFF then press to confirm.
ECO MODE.
or you country may not be
Advanced settings