Eldom velart WB10 Manual De Instrucciones página 7

GENERAL DESCRIPTION
1. display
2. on-switch
3. battery compartment
4. battery
5. battery cover
6. catch
7. hook
8. strap
9. luggage holder
BATTERY REPLACEMENT
• Open the battery case cover at the bottom of scale.
• Take out the used battery.
• Install new baterry by putting one side of the battery bebeath the battery baffle and then pressing
down the other side.
Used batteries should be thrown away the containers specially designed for this purpose.
OPERATION
• Guide the strap (8) through the luggage holder (9).
• Carefully attach the hook (7) to the catch (6).
• Before lifting luggage turn the scale on by pressing .
• Use the button „UNIT" to select a unit: „kg" (kilograms) or „lb" (pounds).
• Wait until the display shows "0.00", and pick up the scale with luggage.
• Keep the scale well-balanced and in a horizontal position. Wait for the measurement result to settle –
the display will first blink three times and then show "H".
• The measurement result will be displayed for approx. 1 minute. The scale will switch off automatically
afterwards.
• To make a new measurement without turning the scale off reset the display by pressing .
• If idle, the device will automatically turn off after 1 minute.
• To turn off the scale press
TEMPERATURE MEASUREMENT
• Use the following button to switch the unit on.
• Use the button „UNIT" to select a unit: „°C" (Celsius) or „°F" (Fahrenheit).
• During change of the unit the display shows „----". The temperature will be displayed after 2 seconds.
Accuracy of measurement: +/- 3°C
INSTRUCTION MANUAL
ELECTRONIC LUGGAGE SCALE WB10
TECHNICAL DATA
- weight capacity:
50 kg/110 lb
- weight resolution:
500g/0,1lb
- accuracy of
measurement: 50g
- power: 1 x CR2032
and hold for 2 seconds.
1 2
3
5
6
8
9
EN
4
7
EN|7