Using The Appliance - Eldom fres PJ300 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 45
MONTAGE (fig.1)
Ensure that the cup (8b) on the bottom of the collector (6)
-
is pushed in.
Place the juice collector (6) into main body (11) and turn
-
right.
-
In juicer collector (6) set: filter (5) and extracting bolt (4).
-
Set the containers (13,14) under the spouts (7,8).
On the juicer collector (6) put the lid (2) according with
-
the indicators, and turn it right.
Slide the pusher into the feeding tube in the lid (2).
-

USING THE APPLIANCE

The appliance will only function if all parts have been properly
assembled and only than the microswitch will be unlocked.
-
Always operate the product on a flat, stable surface.
-
Put the plug in the wall socket.
-
Slice products into pieces which fit into the feeding tube
that is in the lid (2).
-
Make sure the juice jug (14) has been placed under the
juice spout (8).
Make sure that pulp container (13) has been placed under
-
the pulp spout (7).
Switch the appliance on by turning the control knob (10)
-
to the position „ON".
-
Put prepared fruits/vegetables in the feeding tube and
gently press them down towards.
-
The rotating bolt by means of the pusher. Do not exert
too much pressure on the pusher, as that could affect the
quality of the end result or evean blocked the appliance.
Never insert your fingers or an object into the feeding tube.
-
The juice will flow directly in the juice jug (14), and the
pulp will be collectedin the pulp container (13).
-
If the Extracting bolt is locked, you need to set the switch
(10) to "R" for 3 to 5 seconds. Repeat the process two
to three times, then turn off, and disassemble items of
PERFECT JUICER (see CLEANING section) to remove the
blcking element.
-
After you have processed all ingredients and the juice flow
has stopped, switch the appliance off and wait until the
filter has stopped rotating.
-
Make sure you observe the maximum time of continuous
operation of the appliance. Exceeding the time limit and
failing to provide appropriate breaks during the operation
12 EN
fig.1

Publicidad

Tabla de contenido
loading

Tabla de contenido