Eldom COLUMBIA VAC WGC40M Manual De Instrucciones página 10

the indentation, Fig. 3, in the pin, and
fasten with the screw (attention – the blade
has sharp edges)
- Install the front protective mesh (A).
Connect both meshes at the bottom
with the enclosed screw, and secure with
clamps,
- Place the device on a stable and level surface
Set the switch (H) to "0" and connect the
device to the mains.
Use the switch (H) to select the fan speed
(I, II, III).
To turn the device on, set the switch (H) to
a chosen speed.
To turn the device off, set the switch (H) to "0".
Regardless of the speed, the user can
activate oscillations by pressing a push-
button (G). To deactivate oscillations,
depress the push-button (G).
10
EN
Fig. 1
Fig. 2
Fig. 3
Fig. 4