Stop Plate Assembly - avdel Genesis G4 Manual De Instrucciones

S e r v i c i n g t h e To o l
S t o p P l a t e A s s e m b l y ( 7 1 2 1 3 - 0 3 9 0 0 )
Assembly (see illustration below)
•
Place 'O' Ring 2 into the recess in Housing 5 retain in position using grease Molykote
•
Assemble 'O' Ring 4 onto Piston 1 and push assembly into Housing 5 making sure it is in as far as it will go.
•
Position the slot in Piston 1 parallel to the step face in Housing 5.
•
Slide Plate Shut Off 3 into the assembled parts 1, 2, 4, and 5. Retain parts in place using grease Molykote
•
Place 'O' Ring 4 into the recess of Cover Plate 6 retain in position using grease Molykote
•
Place Spring 7 into position locate using the recesses in both Plate Shut Off 3 and Bottle Adaptor Assembly 32*.
•
Position the above assembled parts onto Bottle Adaptor Assembly 32*.
•
Secure in position using two Screws 89*.
*see pages 24 and 25.
ITEM DESCRIPTION
1 PISTON
2 'O' RING
3 PLATE SHUT OFF
4 'O' RING
5 HOUSING
6 COVER PLATE
7 SPRING
22
4
4
1
3
5
89*
6
7
CLOSED
® 55.
®
55.
®
55.
32*
2
OPEN