Redmond RMC-M90E Manual Del Usuario página 16

Program Recommendations for use
FRY Frying meat, fish, vegetables, etc.
SOUP Making various soups and broths
STEAM Steaming meat, fish, vegetables, etc.
Cooking pasta, sausages and other semi-finished
PASTA
products
Making stewed meat, baked milk, brisket, jellied
SLOW COOK
meat and aspic
BOIL Cooking beans and vegetables
BAKE Baking cakes, puddings, pies, puff and yeast pastry
GRAIN Cooking grains and other side dishes
PILAF Making meat, fish, poultry and seafood pilafs
YOGURT/DOUGH Making different kinds of yogurt; proofing dough
PIZZA Making pizza
Baking white and wheat-rye breads including the
BREAD
proofing cycle
DESSERT Making desserts using fresh fruits and berries
QUICK COOK Quick cooking rice and other grains
VII. BEFORE CALLING FOR SERVICE
Problem Possible cause
Display shows the
System error; system board or heating element malfunction.
error code: Е1–Е4
16

15 min 5 min – 1.5 hour / 1 min
 
1 hour 20 min – 8 hours / 5 min
  
15 min 5 min – 2 hours / 5 min
 
8 min 2 min – 20 min / 1 min
 
5 hours 1 hour – 8 hours / 10 min
 
40 min 5 min – 2 hours / 5 min
 
1 hour 20 min – 8 hours / 5 min
 
35 min 5 min – 4 hours / 5 min
20 min – 1.5 hours /
 
1 hour
10 min
6 hours – 12 hours /

8 hours
10 min
 
25 min 20 min – 1 hour / 5 min

3 hours 1 hour – 6 hours / 10 min
 
1 hour 5 min – 4 hours / 5 min

Solving the problem
Unplug the unit and let it cool down. Close the lid
tightly. Switch the unit back on. If this does not eliminate
the error, address an authorized service center
Problem Possible cause
Power cord is not connected to the appliance and/or socket
The device does not
Wall socket is not working properly
switch on.
Power supply failure
Dish is taking too Power supply interruption (power supply is unstable/under-
long to cook rated)
There is a foreign object between the bowl and the heating
element (grain, food particles, debris, etc.)
Dish is taking too
long to cook
The bowl is not properly positioned
Heating disk is dirty
The bowl is not properly
positioned
The lid is not closed prop-
Hot steam escapes
erly; foreign object under lid
from under lid during
Inner lid and cooking bowl fail
cooking. The count of
to seal hermetically
program running time
starts
Sealing ring is dirty, de-
formed, or damaged in any
way
In case you didn't manage to eliminate the defects, please, refer to the authorized service centre.
Environmentally friendly disposal (WEEE)
The packaging, user manual and the device itself shall be taken to the applicable collection point for the recy-
cling of electrical and electronic equipment. Do not throw away the electronic waste to help protect the envi-
ronment.
Old appliances must not be disposed with other household waste but must be collected separately. Municipal
disposal of recyclable wastes is free of charge. The owners of old appliances are required to bring it to a waste facility
centre. With this little extra effort, you can help to ensure that valuable raw materials are recycled and pollutants are
treated as appropriate.
This appliance is labelled in accordance with European Directive 2012/19/EU — concerning used electrical and
electronic appliances (waste electrical and electronic equipment WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the
EU.
Solving the problem
Ensure that the power cord is connected to the corre-
sponding inlet on the housing of the appliance and to
the socket
Connect to a properly working wall socket
Check the power supply. If not available, contact local
electricity supply company
Ensure that the power supply is stable. If unstable/
underrated, contact local electricity supply company
Unplug the appliance and let cool down. Remove foreign
object or objects
Properly position the bowl into place
Unplug the appliance and let cool down. Clean heating
disk
Properly position the bowl into place
Remove foreign objects (grain, food particles, debris,
etc.) from under the rim, if any. Always close the lid
until it clicks into place
Check the sealing ring. Replace, if necessary