Gude MIG 155/6 W Traducción Del Manual Original página 34

ENGLISH
Class A (IEC 60974-10):
30
If you intend to use the apparatus in residential sur-
roundings supplied by the low voltage mains supply,
an electromagnetic lter may be required to suppress
electrical disturbance to a level where they will no
longer be a nuisance to the user.
The apparatus may be used in industrial or other
areas where power is not supplied by municipal LV
mains.
Class A apparatus are not intended for use in resi-
dential areas where power is supplied via municipal
LV mains, since unfavourable power conditions may
cause interference.
As a user, you must make sure, after consultation with
your energy provider, if necessary, that your point of
connection on which the machine is to be operated
meets the requirements above.
The user is responsible for faults arising from the
welding.
SYMBOLS
The appliance must be stored in a dry
place and protected from frost.
Keep the machine out of reach of
children.
Never expose tool to rain.
Wear personal protective equipment.
Use a welding mask!
Special welding gloves to be worn at all
times.
Wear safety cut through resistant shoes
with safety sole and steel toe !
Protective apron to be used
Unplug the machine before any work
on it.
Caution!
Read the operating instructions
to reduce the risk of injury.
Pressure bottle to be secured by chain
Warning against dangerous
voltage
Risk of explosion
Warning against toxic fumes!
Keep dry at all times. Never expose tool
to rain.
Keep distance of persons Observe to keep
out of dangerous zone
~ Single-phase transformer with recti er
1
MIG (welding, metal-inert-gas)
MAG (welding, metal-active-gas)
Suitable for welding with an increased
electric risk.
Single-phase alternating current with
rated frequency of 50 Hz
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Keep dry at all times.
CE marking
TÜV / GS conformity mark