Trouble Shooting; Repairing Service; Spare Parts - Grizzly EHS 460-2 T Traducción Del Manual De Instrucciones Original

GB
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair. This
requires that the appliance is returned
to to the dealer undismantled and with
proof of purchase and guarantee.

Repairing Service

• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our ser-
vice center will be glad to provide you
with a cost estimate.
We can only process devices which
have been packaged sufficiently and

Trouble Shooting

Problem
Device does not start
Device runs with in-
terruptions
Blades become hot
28
Possible cause
Mains voltage not on
On/Off switch defective
Worn carbon brushes
Defective motor
Power cable is damaged
Internal loose electrical
connection
On/Off switch defective
Blades are blunt
Blades are notched
Too much friction due to
lack of lubrication
which have been dispatched with cor-
rect stamping.
Note: In case of complaint or service,
•
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.

Spare Parts

Replacement parts may be ordered di-
rectly from our Service Centre.
When ordering, always specify the ma-
chine type and the part number in the
exploded drawing.
Fault correction
Check plug socket, cable, line
and plug, where appropriate,
have repaired through electrical
specialist
Repair by Service Centre
Check the cable and have it
changed by the Service Centre if
necessary
Repair by Service Centre
Have the blades sharpened or
replaced (Service Centre)
Have the blades checked or
replaced (Service Centre)
Oil the blades