Publicidad
which is connected to the running rails - see
Figure
.
You can use any piece of C Track as the feeder
track.
Plug the power cord (1) for the transformer into the
wall outlet for your household current.
6. Operation
6.1 Delta Addresses
The 67025 Controler can distinguish among a total
of 4 addresses.
1 = Steam Locomotives
2 = Diesel Locomotives
3 = Powered Rail Cars
4 = Electric Locomotives
6.2 Locomotive Address
The locomotive addresses are set at the fac-
tory. The addresses are given in the instructions
for each locomotive. These addresses are not
binding; they can be changed by following the
instructions for the locomotive. If you want to
control a locomotive with the controller in this
set, an address must be set for the locomotive,
which can be selected with the controller. These
addresses are:
Setting on the Address Selection
Switch
1
2
3
4
6.3 Selecting a Locomotive
You look for the locomotive that you want to cont-
rol on the address selector switch (6).
Steam locomotive
selected
Locomotive
Address
78
72
60
24
Diesel locomotive
selected
13
Publicidad
